Menu      

Home
Register to Drive!
Forms & Tech
Event Schedule
09' Comp Series Pictures/Videos
TD Merchandise

       

 

 

Tech Inspection Parameters      

Car Exterior -

- exhaust must not drag on the ground

- all lugnuts must be present and tight

- transmission and rear-end must not leak

Engine Compartment -

- NO LEAKS OF ANY KIND! This means engine oil, p/s fluid, gear oil, ETC.

- Battery must be tied down with stock or better bracket. This means no zipties, no duct tape, no bungee chords etc. If relocated, battery must be in marine style plastic box, secured in a safe manner.

- It is reccomended (but not required) to run water with no coolant. If exposed to the drifting surface, coolant can cause a hazard and will require cleanup whereas water will evaporate.

Car Interior -

- Seats/Seat mounts must be stock or better as safety is concerned

- Seatbelts must be stock or better as safety is concerned

- Gas pedal should have good returnability

- Brake/Clutch should have solid feel

 

Anything not mentioned in this document is subject to approval by the chief of tech.

 

Be sure to check back soon. We'll be updating shortly with downloadable/printable registration and minor-release forms!

 

Contact Info      

If you have questions that aren't answered by the info on this page, please contact us!

Info@ThunderDrift.com

Old News      

News 04/23

News 03/23

News 02/15

News 01/06

News 11/21

News 10/22